David Bridge 6 inch Extruder. Complete 6" David Bridge Extruder with c0-ex truder.
650 Kilos/hour. P.P., P.S. or ABS.Recent Multi Purpose 6" SCREW & BARREL fitted. small Dolci Co-extruder connected via co-extrusion block. Extra capacity available via co-extrusion with another co-extruder.
Motor. Motor is 224KW, approx. 168HP. .
Digital instrumentation control panel.
Gear Box.
Barrel. Barrel water cooled. Barrel length from feed section 4.7m Barrel 30:1 LD
Barrel diameter is approx. 255mm Barrel is Vented.
Die Range:
1000mm wide standard coat-hanger die with changeable die lip.
ABS/HIPS is from 200micron to 2200.
PP was run mainly from 700micron to 2200.
There is also another bottom changeable lip that will allow for thicker sheet up 4mm.
Die has a restrictor/choke bar.
Maag Pump.
1 yr. old Magg gear pump for P.P. almost unused.
Calender rolls. Recently re-engineered and re-furbished 3 x 500 mm diameter
1073 mm Face length Water cooled. Chill Roll Motors. 4kW AC Motor/Gearbox Inverter Driven.
This motor is linked to the Pull motor for automatic speed increase. It can also be manual controlled for tension. Extractor canopy fan. Water bath. Squeegee rollers. Haul-off rollers.
3 Station 6" air mandrel winding unit..
Barrel. Barrel water cooled. Barrel length from feed section 4.7m Barrel 30:1 LD
Barrel diameter is approx. 255mm Barrel is Vented.
Die Range:
1000mm wide standard coat-hanger die with changeable die lip.
ABS/HIPS is from 200micron to 2200.
PP was run mainly from 700micron to 2200.
There is also another bottom changeable lip that will allow for thicker sheet up 4mm.
Die has a restrictor/choke bar.
Maag Pump.
1 yr. old Magg gear pump for P.P. almost unused.
Calender rolls. Recently re-engineered and re-furbished 3 x 500 mm diameter
1073 mm Face length Water cooled. Chill Roll Motors. 4kW AC Motor/Gearbox Inverter Driven.
This motor is linked to the Pull motor for automatic speed increase. It can also be manual controlled for tension. Extractor canopy fan. Water bath. Squeegee rollers. Haul-off rollers.
3 Station 6" air mandrel winding unit..
Many spares
Price GBP98,000.00 ex site UK
Khune Extruder 70mm screw. 1980 - rebuilt 1994
NRM/Welex C0-Extruder PET 3 machines 1980's, 1998, 1998.